Schedule Upkeep Of The Glove Box

From Official Sandship Wiki
Jump to navigation Jump to search

Etelux reminds you that in addition to the normal inspection of the glove box, the daily maintenance function of the glovebox is also vital

one. Just before and right after each individual perform, to start with thoroughly clean the atmosphere to make the ground dry and clean up. Then clear the devices, which include the internal and outer surfaces of the glove box, the observation system, the function floor, and so on., to be free of debris and cleanse.

two. Cautiously record the drinking water, oxygen content, and fuel consumption of the devices in the glove box each working day to prevent insufficient gasoline pressure and lead to the machines to stop jogging.

three. Pay out focus to the volume of fuel in the doing the job gasoline cylinder at any time and change it in time.

four. In scenario of power failure, push the "vacuum pump" button on the panel to make the vacuum pump run following power on


five. Take note: Following ability on, if there is a trouble that it can not start out, the probability is that the vacuum pump power cable is loosely related. The second explanation is that the vacuum pump’s have swap is not turned on


6. When you want to put the sample into the glove box, use a smaller transition chamber as considerably as feasible. Just before opening the transition door, shell out awareness to regardless of whether the strain gauge pointer on the valve cavity is at the zero placement. If it is, you can open it straight if not, you will need to turn the swap less than the valve cavity to the "filling" placement to allow the gasoline enter the glove box changeover compartment, and then transform the swap again to the intermediate placement, then you can open the changeover compartment Place the sample in the doorway, and then shut the doorway. When positioning samples, be very careful not to contact the internal wall of the transition chamber with your fingers, wear gloves to decide and spot the sample



Doing these routine servicing responsibilities can lessen the decline level of the glove box, increase the company lifetime of the glove box, and also lessen the prevalence of accidents